Washing machines with intermediary spinning
The loading capacities of these washing machines are 15 kg and 22 kg.  The construction of machine is very robust. Machines are driven with the 2 electric motors.  These washing machines ensure high quality of laundry and are highly suitable for the laundry at the kindergartens, hotels, pensions, industrial enterprises as well as for the laundry of the clothes of operators.  Washing machine is easily operated due to the automatic control regime ensured by the microprocessor control. Thermic relay permits to sellect the desired temperature of laundry. Machine is fixed to the floor of the buolding using the anchor boluos.  There is three chamber water tank for the washing installed on the upper part of the machine. The panel covers of the machine, as well as the external and internal drums are produced of stainless steel AISI 304. There is foreseen the special regime of the gradual cooling for the synthetic and woolen tissues, which permits to avoid the thermical shock of laundry.   The design of the oustide covers of machine ensures the easy dismantling and access of the internal part of machine for the repair and service operations. There is foreseen highly effective water heating system with the capacity of 12 kW. The machine is designed for the connection to the cold and hot water piping but it also can be connected only to the cold water supply.  The heating regimes can be electric or by steam.  For more information please consult the table of the technical data.

Washing macines with the final wringing, automatic control and the soft hanging
The loading capacities are 10 kg, 15 kg, 24 kg, 32 kg, 42 kg and 55 kg. The construction of the washing machines with the final spinning is very robust.    Machines are driven with the electric motor controlled through the frequency converter.  It provides a possibility to set and change the speed of washing and spinning depending on the type of laundry.  Easily programmed microprocessor provides the possibility to change the level of water, temperatures, washing and spinning time etc.    There is a possibility to program up to 99 washing cycles.  Washing programs can be changed very easily using microprocessor control of the memory card. The soft system of hanging with the mechanical impact compensators on the lower part of the machine ensures the stability of operation and decreases the vibrations to the minimal possible level.  It increases the service life of the machine. Washing machine is equipped with the water tank of the 3 or 5 sections depending on the loading capacity of the machine. Water tank corresponds to the CE requirements.   The machine can be connected to the source of the liquid washing agents.The panel covers of the machine, as well as the external and internal drums are produced of stainless steel AISI 304. There is foreseen the special regime of the gradual cooling for the synthetic and wool tissues, which permits to avoid the thermical shock of laundry.   The design of the oustide covers of machine ensures the easy dismantling and access of the internal part of machine for the repair and service operations. The machine is designed for the connection to the cold and hot water piping but it also can be connected only to the cold water supply.  The heating regimes can be electric or by steam.  For more information please consult the table of the technical data

Washing machines for the medical application (with the separation)
The range of loading capacity is 25 kg, 35 kg, 45 kg, 62 kg, 83 kg, 120 kg, 140 kg, 200 kg. Machines are equipped with the final spinning, microprocessor control and two supports. Their distinctive characteristic is the compliance of the design to the strictest hygienic requirements ensured by the separation of the parts of uploading (with the separate inlet) and the offloading of the clean laundry with the separate outlet. Machine is installed at the wall separating the laundry room in two parts what permits to avoid the mixing of the clean and dirty laundry.  The construction of the washing machines is very robust.    Machines are driven with the electric motor controlled through the frequency converter. It provides a possibility to set and change the speed of washing and spinning depending on the type of laundry.  Easily programmed microprocessor provides the possibility to change the level of water, temperatures, washing and spinning time etc.  There is a possibility to program up to 99 washing cycles.  Washing programs can be changed very easily using microprocessor control of the memory card. The bearings of two supports ensure the long and constant service life of the machine. Due to the soft hanging system and the unit of the elimination of balance deviations designed as the system of springs with the air pillows, the work of machine generates only minor vibrations.  It ensures constant operation of the machine. There is installed washing tank made of stainless steel and equipped with the five exchangeable big volume dosing vessels  for the washing agents. The machine can be connected to the source of the liquid washing agents.The panel covers of the machine, as well as the external and internal drums are produced of stainless steel AISI 304. There is foreseen the special regime of the gradual cooling for the synthetic and wool tissues, which permits to avoid the thermical shock of laundry.   The design of the oustide covers of machine ensures the easy dismantling and access of the internal part of machine for the repair and service operations. The heating of machines can be electrical or the steam based.  The machine is designed for the connection to the cold and hot water piping but it also can be connected only to the cold water supply.  For more information please consult the table of the technical data. Machines with the capacity to the 55 kg are equipped with the electric or steam based heating and the machines with the loading capacity of 63 kg and more are equipped only with the steam based heating.  All washing machines comply the requirements of the CE norms.